Barn Door Hardware – Door Anatomy

Doors come in all shapes, sizes, and weights. They are made of different materials, are intended for different uses, and move using different movement systems. One of the more interesting of the movement systems happens to be a current growing trend called barn door hardware, also known as flat track hardware. Even though that is this author’s preferred style of door hardware, that is neither here nor there. The design of this article is to address the construction of doors and their subsequent anatomy.

As stated previously, doors can come in all shapes and sizes. Here we’ll talk about the make-up of a standard 3′x7′ door, the door most commonly used in most homes. This description will be given as though one were looking at a door in the closed position.

Starting off, there are two long vertical pieces that run the length of the door on both the left and right side. These are called the stiles. On the top and bottom there are two horizontal pieces that lock into the vertical stiles; these are called the top and bottom rail. There are also two other horizontal rails, one towards the top, and another that sits at the height of the door knob or handle. The one near the top is called the intermediate or cross rail, and the one near the center is called the lock rail. Running vertically in the center of the door you have what are called mullions. These parallel the side stiles and lock into the horizontal rails just described.

Between all of these rails, stiles, and mullions you’ll notice that there are six panels- four large and two small. The two smaller ones are almost square and sit at the top of the door. The four longer ones are rectangular and take up the rest of the space of the door.

That is the basic anatomy of a standard door found in most homes.

How You Are Able To Select Top High Quality Door Hardware

eloquent sets of door hardware like residential door locks, doors handles and knobs always are the center of attraction for that customers. Being the prologue to any residence, the entrance depicts lots of significance towards the entire household. The residential door hardware assimilates with each other making a unique style and preference. Going back to a brief history of Door handle, it absolutely was invented within the 1700s. The conventional model were built with a bolt or spindle running from the door sitting more than a cylinder, to which the spindle is connected. lots of technically refined door hardware is seen on the open market.

A sense of protection and privacy within the entire people has become so vital that each other person wants to have the best protection facility availed at his or her residence. The best residential door locks you can purchase today prevent any kind of breach into the privacy of the individual. eventually digitally enhanced locks took over the market. Assorted door handles and knobs increases the beauty of the residence, giving a picturesque panorama towards the edifice.

Being exposed to many handling, the doorway handles are the most prone to infectivity. anti contamination metals are employed to avoid any scope of infection. Varied merchandise is being approved and used with anti contaminated metals, with a scope for better protection for your people. the oligodynamic effect and electrostatic effect within the brass and copper metals kills the microbes within a span of 8 hours. the market places are flooded with a variety of products, regarding varied dimensions. The rates to which are not always exorbitant. Discount knobs, handles and locks etc are quiet often offered by various market places.

Technically refined with antique artifacts the finance industry is flooded having a remarkable clinch group of sophisticated hardware. People needs to be aware of the following factors before purchasing any accessory:

Quality of the Door hardware is one of the most important decisions you have to consider, while making a purchase. People prefer items that are long lasting and are prone to corrosions so as to maintain the look of the thing of beauty. The delicacy of the hardware should be thought about while diving in of glass products. robustness of the products is decided through the stratum of usage. Today a varying selection of door knobs and handles can be obtained in a variety of styles like modern, classical, art-deco and traditional in a dazzling array of finishes from brass, chrome, acrylic, to brushed metal.

Prominence is featured they can be a mark of class distinction and eminence in terms of household artifacts. Every one else tries their level best to display the extravagant display of decoration and Excellency.

People who are submerged within the aesthetic great thing about house hold furniture’s and hardware crave for creative products offered by the marketplace. Sometimes custom made products also provides the requirements of folks that desire to have a diverse display of artifacts.

Whatever could be the requirement, security counts for the greatest ratings when compared with additional circumstances. Illegal trespassing is definitely controlled through adequate and quality residence knobs and locks. Technically refined dynamic locking system caters for the confidentiality of restricted areas Residential Door Locks equipped with superior laser systems are customized as per requirement to boost the protection system.

When one opts to choose any Door hardware they always incline on the functioning of the products. continuous usage of the Door hardware results in damage try to remains a concern. Door knobs usually is commonly a source of infection for being used repeatedly. this tendency to get infected can be checked through the use of appropriate metals like bronze and copper.

vi)Cost factor
Price is the main factor which decided within the expenditure as per the budget. Servicing and maintenance are the additional circumstances together with cost of the product which will a spot of concern while making any purchase. At times theses products can be obtained at discounted rates and with offers, which may be availed at times.

Over Internet numerous door hardware are available. Where, you can suit themselves depending on their requirement through the custom-made product section. The available option may be further crosschecked through visits for the hardware stores. It should also be considered that as being a one-time investment, you need to always try to believe sometimes paying a little more to buy from lodge logic that will provide customer care will probably be worth the excess cost.

A Look at How to Shop For Sliding Door Hardware

Sliding door hardware is available in a variety of formats. Some of the more common examples of such hardware are pulls, (also known as handles), which are among the most well known hardware items that are also available in a huge variety of models. You can purchase ordinary pulls and those that are very ornate; and they are available in a variety of sizes, finishes and shapes.

Pulls are common items of sliding door hardware; and they can be bought as separate items or they may already be attached to the doors. When selecting sliding door hardware you must ensure that tracks are of good enough quality. Poor quality and inexpensive tracks are attractive on account of their cheapness but they will not provide suitable functionality and so may not always be the best option.

Also, tracks are suited for different weights of the sliding doors, so it is necessary that you pick sturdy tracks for sturdily built doors and flimsy tracks for flimsily built doors. Failure to properly match the tracks to the doors will mean that it would be hard to operate the doors.

Straight sliding systems are also some other common items of hardware that work with sliding doors. Such hardware will in fact be built out of metal or wood and may operate on single or even double track runs.

In case you need folding hardware which can be used on doors that fold in and which are generally used in small sized garages and also in heavy industrial areas including warehouses and factories. Such hardware items are made from steel and the range of products span everything for indoor and also outdoor use.

In case you need hardware for indoor use then you can pick from standard sets that come with all the necessary fittings and with step by step instructions to help you install the items.

If you are looking for the best hardware for sliding doors then you will need to look for a reputable seller that stocks items that are made by companies that provide a complete line of hardware to suit all kinds of sliding door applications including folding, straight sliding and center-folding as well as around the corner systems.

Before buying these kinds of items, be sure that you check to see whether the seller is a member of reputable associations such as the Door and Hardware Institute. Membership with such bodies will assure you that you are getting quality products.

Shower Door Hardware – A Checklist

Shower door hardware greatly influences the look as well as the performance of your shower door. Some of the basic hardware are sweeps, drip rails, hinges, pulls, handles, knobs, caddies and bumpers.

Many shower doors come in kits complete with appropriate hardware. But if you want to explore more options, you can go online (,, etc) for a wide array of hardware choices. Take a look at some of them.

Brass Clips:

American Shower Door offers these brass clips with flat or beveled edges. You can opt to have these clips customized for your preferred angles, designs and shapes. They are available as 2 inches by 2 inches and full 3 inches by 4 inches hinge profiles.

Vienna Series Frameless Shower Door Handles and Hinges:

This shower kits consist pull handle with 6-inch hole spacing and two bottom or top mount hinges. The Tubular Back-to-Back Economy Pull Handle features 1.5mm thick brass tubing, 1 and ¼-inch diameter metal washers and nylon spacer washers for glass contact protection. The hinges are designed for 3/8 inch to ½ inch glass and available in either glass-to-glass or wall mounting. The solid brass hinges have stainless steel moving parts. Finish options are chrome, brass and brushed nickel.

Stainless Tension Pole Shower Caddy:

This space-saving corner caddy is a perfect replacement designed to fit best in vertical spaces with height of five to nine feet. It is constructed of stainless steel in elegant polished finish. The complete set comes with four baskets where you can store your toiletries, towel bars and hooks. The available sizes are 8 and ½ inches wide by 5 feet to 9 feet high by 8 and ½ inches deep.

Contemporary Style Back-to-Back Shower Door Knob:

These solid brass knobs from Glass Distributors Inc. come in almost 17 attractive finishes. Prices vary according to the finish option–$25.30 for chrome, brass, brushed nickel, polished nickel, $33.40 for white and $33.50 for oil rubbed bronze and antique brass. Knob measurements are 1 and 3/16 inches in diameter and 1 and 3/16 inches in height.

7/8″ Clear Shower Door Bumper – Package:

These clear bumpers are best for sliding doors. They have adhesive backing, medium hardness and a center screw home. They come in diameter of 7/8 inch.

U-Channels and Thresholds:

This header kit provides additional support and safety for your door. It secures the glass panels that have not reached the ceiling. The items are sold in 66 inches, 98 inches and 144 inches lengths, 1 and ¼ inches double profile extrusion and choices of facing edges. Part numbers and their finishes are SDH660BA in bright anodized, SDH660GA in bright gold, SDH660BL in black, SDH660GM in gun metal and SDH660W in white.

When buying shower door hardware, take time to examine the myriad of choices available on the market and choose the items that will work best in your shower room.

Make an Impressive First Impression With Door Hardware

Picture this: you’re walking up to a beautiful, brand new home. Although you’ve already noticed features like the color of the home, the landscaping in the yard, and the size of the porch – you have yet to make physical contact with the house itself. In order to enter the home, what is the first thing you have to touch? Obviously, you must reach for the doorknob. Things like doorknobs aren’t normally focused on, but in order to make that winning first impression, a little attention must be paid to them.

Although many homeowners overlook their door hardware, doors are what guests to your home touch first. Although you may have spent thousands of dollars perfectly furnishing the rooms that lie behind these doors, the first impression that visitors have center around door hardware. These small details in the home make a bigger impact than most assume. Moving on from just the front door, doors to rooms like the bathroom, the bedroom, and the kitchen all act as the barrier between guests and these beautifully designed rooms. Within these rooms lie other doors. Things like cabinets also require the same attention when it comes to choosing door hardware.

First, we focus on the bathroom design. Bathroom’s house a multitude of doors, not just an entry way. From cabinets to closets, door hardware comes into play numerous times throughout the bathroom. Making a simple adjustment, like choosing door knob hardware that enhances your bathroom’s theme, can add a fun touch into the room without cluttering your space. Decorative elements in smaller rooms must be chosen with caution. The bathroom isn’t typically known for it’s size – so decorative elements must be chosen carefully. By choosing things in the room that already exist, like door hardware, and improving upon them – you have instantly added a decorative detail without cluttering floor, wall, or counter space.

Another room in which door hardware plays an important role is the kitchen. Kitchen design can almost focus upon door hardware given the large amount of cabinets in the room. In many kitchens, cabinets are hanging directly at eye level. Choosing door knob hardware for your cabinets that coordinates with your theme, but doesn’t overwhelm, is extremely important. For example, if you have wooden floors, cabinets, and counters paired with sleek silver appliances – you can easily pull these two materials together with the use of door hardware. Instead of opting for traditional wooden pulls for your cabinets… choosing silver door knob hardware incorporates the material of the appliances onto the wooden cabinets. Without having to undergo any serious remodels or projects – your kitchen design has become more coordinated and organized.

Installing door hardware is simple. If you’re interested in pursuing a project like replacing bland door knobs with sophisticated door levers, you won’t need to reserve more than a few hours to accomplish the task. Regardless of whether or not you’re a home improvement expert, you can complete the installation with just a few tools. You’ll save time and money on outside labor, and most importantly – you, as the homeowner, will be making fun and exciting changes within your home.

So take a look at the doors in your home. From your front door to the door to the medicine cabinet, what is your door hardware lacking? Could your bathroom design be enhanced by replacing your current cabinet knobs with more colorful cabinet pulls? Or is your kitchen’s design begging to be updated with the installation of sleeker, more sophisticated knobs? Regardless of which doors you’re interested in impacting, new door knob hardware will give your doors that amazing first impression that will have your guests talking.

Sliding Door Hardware: Installing Bi-Fold Sliding Doors

Materials and Tools Needed

- Combination Square
- Cordless Drill
- Centering Bit
- Hacksaw
- Plumb Bob
- Bit Extender
- Hacksaw

*This is a fairly easy job. The job will be a bit more difficult if the doors are extremely heavy, or if your closet opening isn’t square.

Finish/Paint Doors

You always want to finish and/or paint your doors before installation. This will save you a lot of time.

Mount the Hinges

Take a jamb side door and mark its inner edge 11-inches from the bottom and 7-inches from the top, centered between the two. Place the door on edge with the marks facing up so that you can see them.

Now take the lower half of a hinge and align its bottom with the bottom mark. Make sure its knuckles are facing back and flush to the edge. Use your self-centering bit to drill pilot holes through the hinge holes. Screw on the hinge plate and attach the top and middle hinges to their marks.

Place the leading (inner) door on edge, facing back-to-back with the first door. Align the doors evenly against a square. Now put the hinges together and screw the hinge plates to the leading door.

*Repeat this process on the second pair of doors.

Attach the Track Hardware

Fasten the pivot plates and the locking arms to the top and bottom of each of the doors. The pivot plates go on the tops and bottoms of the jamb-side doors, and the locking arm on the tops of the leading doors.

*Each kit requires its hardware to be uniquely positioned, so check the diagrams that come with yours for exact measurements and placements.

Install the Track

After the track is put together you will be ready to install it. Use your hacksaw and cut the track to properly fit the closet length/opening. Slide the hanging hardware into the track and attach the track to the door header with the screws that should be provided.

*Don’t tighten the hardware onto the track. It will be easier to hang the doors later if the pieces are loose.

Position Your Floor Bracket

For this you need to use the measurements that are supplied by the manufacturer to position the floor bracket next to the doorjamb properly.

Hang your plumb bob tool from the center of the track above the floor bracket to align the pinhole in the bracket front-to-back. This will ensure that the doors are plumb when installed.

*Outline the bracket in pencil to mark its exact location.

Screw the bracket in place. Now remove the screws and set the bracket and screws aside.

Hang the Doors

Carry your doors to the track and lift the jamb side of the door so that it locks into the pin of the top pivot plate. When you are sure that the pin is all the way in, push the lever on the side of the socket to lock it in place.
Now with the doors closed, swing them forward enough to catch the floor bracket in the bottom pivot pin.

Attach the Floor Bracket

Swing your doors back into place so that you can attach the floor bracket. Find the marks you previously made and then use your flexible bit extender to screw down the bracket.

Hang the other set of doors using the same technique already stated here.

*You may want to get some help, as this will be easier with another person.

Attach the Door Aligner

You need to do this from inside the closet with the doors closed. Go ahead and mount the door aligners between the two leading doors. The aligners should catch when the doors are closed.

*Do this about 6-inches up from the floor.

Install the Door Pulls

The door pulls (handles) can be installed pretty much however you want them. Pick the height you want to place them at and them follow your manufacturers instructions on installing them

You should now be able to enjoy your new bi-fold doors. Your closet will have a whole new look and feel.

Antique Door Hardware – Buy Like A Professional

Buying antique style door hardware can lead to trapped fingers or a door knob that doesn’t work. But there are questions to ask which can prevent mistakes.

Door knob or door handle?

First thing to check is the measurement from the edge of your door to the center of the hole drilled for the lock. Check that it’s long enough not to trap fingers on turning a door knob. If the distance looks too short, get a lever door handle instead.

Old or new:

Do you need a matching set? There are few long runs of matching reclaimed doorknobs around today. If you have time to search, you might be lucky. Otherwise, it’s easier to buy new. Companies like Drummonds make indistinguishable copies of beautiful originals.
There is a mouthwatering variety of designs to choose from if you buy an antique knob. But you do need to get out there and search. And you need to check carefully that an antique will work well.
New door hardware is simpler to install and tends to work better.

Which style?

This is a matter of personal preference. Ask yourself:

Do you want the style of the door knob to conform to the rest of the house
Do you want the style of the door knob to conform just to its door
Do you simply what to choose what you like, without regard for surrounding decor

Armed with your answer, look at what is available and select your favourite.

Which material?

Brass, iron, wood and glass are the most common.

Brass is commonest of all. It has the big advantage of not rusting or rotting, it’s decorative when polished and acquires an attractive patina over time. It is also easy to plate for a silver or copper finish. Heavily polished knobs will tarnish to a wonderful patina as long as they are not lacquered.
Brass plate: Forget these. They are trouble.
Iron knobs need protecting except for pure black which is slow to rust. The most popular form of protection is to paint them, but oiling or waxing look more natural and wear to a nice patina over time.
Wood is also common. Ebony and fruitwoods are traditional but modern hardwoods are mainly used now, often stained to look like ebony. Cracks in these knobs are normally not serious and add to the character.
Ceramic or glass. These knobs usually have brass working parts. Look for hairline cracks. Small cracks are fine. Serious ones can be fatal.

Rimlock or a mortise lock? What are these? A mortise lock is set within the door thickness; a rimlock is a box planted on the door that catches in a box on the door frame.

This matters because a rimlock has different knobs on either side of the door, while a mortise lock doesn’t.

So you need to be sure that the knob you want is for your sort of lock. It may be possible to make it work anyway. Ask your supplier if it can be altered.

Check spindle size:

The spindle is a square metal bar which connects the door handles on either side of your door. If it’s too small for your lock, the knob will rattle and there’s nothing you can do to fix it. Don’t buy this knob.
It doesn’t matter so much if a spindle is too big. You can file off some of the spindle, or open out the lock.

Problems with wear and tear:

Worn spindle: normally easy to replace
Worn sockets: rare but hard to fix
Grub screws/Set Screws: Are they all there and do they turn? Screws on old knobs may have peculiar threads so can be hard to replace. If you have to replace one, it is often easier to drill it out and re-thread it to a modern metric thread. At least you know it will work. And you know you can replace the screw if you lose it!
General wear and tear: some surface wear makes a old knob look as if it has been in place for years, so don’t write off an antique door knob only for being imperfect

Add Decorative Touches With Door Hardware and Hinges

When it comes to decorating a house there are a lot of different options you can choose from in order to get the style and feel that you are looking for in any particular room. For instance, you can add decorative touches to a living room by incorporating throw pillows, blankets, area rugs and picture frames in your over all interior design. The same can be said for the bedroom and other areas in the house. Often times you do not have to do a major renovation or make a major change to the room in order to get a different look. Simple changes to the accessories in a room can go a long way with decorating.

One way to add a decorative touch to any room in the house is by updating the home hardware. This update can include door handles, lighting fixtures, hinges and many other accessories. While these details may seem unimportant in the grand scheme of a house, these are the details that actually tend to matter most. Often times the small details are the elements in a room that really pull the design together and make everything look complete. You can purchase the perfect furniture, entertainment center and end tables for a living room, but it will not look complete until you have all the small details squared away.

There is no right or wrong way to choose a specific type of door hardware to install in any room. There are many different styles to choose from and often times it depends on your personal preference. The first step to choosing the right hardware for you is to choose what type of finish you would like to have. Finishes typically include oil rubbed bronze and dark oil rubbed bronze, matte black, satin nickel, polished brash and polished chrome. It is important that once you are set on a particular finish that all the accessories in a particular room match the finish. For instance, if you choose satin nickel for your kitchen cabinet handles, make sure that the sink faucet and lighting fixtures are satin nickel as well.

Now that you have choose what type of finish you would like to accent a particular room with, the next step is to choose a specific type of hardware. Door hardware comes in many different types such as door levers, handles and knobs. There is no right or wrong decision when it comes to choosing between a lever, a handle or a knob. Once you choose between a knob, handle or lever, it is important to find a deadbolt that matches if you choose to use one. Sometimes the hardware already has the lock self-contained, however that is not always the case, therefore it is important to choose a deadbolt that matches.

Door hardware and hinges come in all different shapes, sizes and detail. It is important to choose a style that flows with the rest of the decorations in the house and fits your personality. The hardware can have as little detail or as much detail as you want.

The Important Elements of Selecting Screen Door Hardware

Whether you call them storm doors or screen doors, the important elements of screen door hardware cannot be compromised. Old screen doors were made simply of aluminum. However, today’s newer products include higher gauge aluminum and other compounds such as vinyl or plastic, rendering them much stronger.

You’ll find storm doors in any type of style that will suit the architectural style of your home. But, they also come in different prices. There are many reasons for that. One has to do with the style. The other has to do with the sturdiness. And there are still other differences that occur between the lowest priced storm door and the highest priced.

Color are certainly has a lot to do with it. Custom colors, which will complement the style of your home, and the colors that are already exist play a big role in determining the price. The fact is, doors with colors, must pass through a process that is both time-consuming and costly.

The hardware is yet another factor that helps to determine the cost of a screen door. In the higher end versions, you are able to choose from brass or silver, or even antique brass. This doesn’t come as an option in the cheaper doors.

One of the best ways to understand the differences is to get out there to various retail outlets and do-it-yourself centers. Get a hands-on feel on the difference between the more expensive models and the more inexpensive ones. Open and close each door to see how they differ in smoothness and in sturdiness.

But there’s more than that. The style and functionality are also important when choosing a screen door. There are certain features that are included in the more expensive ones that do not appear on the cheaper ones. Things like embellishments or ornamentation. Obviously, the higher end versions may include these. As for the functionality, this is probably one of the most important factors.

The way the door opens and closes, the amount of pistons and their location as well as their quality play a role. These allow you to have more control in adjusting to speed. In addition to that, the insulation also plays a role in determining the price. While some have no insulation whatsoever, others do. Although they will cost you more, you will be saving money by saving energy with heating costs on your energy bills.

Choosing an Entryway Set For the Home – Buying Guide For Single Or Double Doors

An entryway set is an important feature of the front door not only because it sets the tone for what visitors can expect inside but because it is a crucial focal point of design. Most home entryway sets are chosen to reflect the architectural style of the home itself. Understanding how to choose a new entryway set can seem like a daunting process with so many options available but it can be made simple by understanding a few fundamental questions:

Is it for a Single or Double Door?

A single door typically requires a single knob and deadbolt set. Depending on the style of entryway set these could be two separate pieces that function separately from each other or one larger piece installed onto the door. If they are separate pieces a passage style doorknob is typically used and a single cylinder deadbolt is installed above it to secure the door. Multiple deadbolts can be keyed the same.

A double door system will typically utilize one active knob and one dummy knob for the non functioning door. The active door will use a system similar to the single dummy set up while the inactive door will be secured at all times (sometimes by an interior surface bolt) and a non functional doorknob will be installed. The non functional knob is referred to as a double dummy style knob and although it will appear the same as the functioning knob it will not turn or operate a latch mechanism.

What Backset is needed?

The backset refers to the distance from the center of the bore hole to the edge of the door. Not all doors have the same backset measurement so it is important to measure this distance before choosing a backset size.

For exterior doors a standard backset is 2 ¾ inches – this is in most cases however not all so measure carefully.

For interior doors a standard backset is 2 3/8 inches – once again this is in most cases but not all so measure carefully.

The backset length (if the door was drilled correctly) should be the same for the deadbolt.

What does center to center distance refer to?

Entryway sets with the deadbolt and knob on the same plate will include a center to center measurement – this refers to the distance between these two pieces on the door. If you are replacing an existing set measure the distance from the center of the existing deadbolt to the center of the existing knob to obtain this number – the same size will need to be used.

What Finish should be used?

The variety of finishes available depends entirely on the manufacturer – some offer as few as three and some offer as many as fourteen. Matching existing finishes from other manufacturers can sometimes be problematic because finishes can vary slightly. If available use a finishing guide to determine which finish will best match your existing hardware. If all the door hardware is being replaced in a new color try to select hardware from a single manufacturer to ensure a good match.

Using the same finish on different items on and near the door will help to create a common theme and a more complete look for the front door of your home. Door knockers, mail slots, kick plates and door bell buttons should be coordinated within one theme and finish.

Tips and Suggestions

There are a wide variety of options available for entryway sets in stores and online. Choose a style that is compatible with any existing holes to avoid the need to re-drill or replace the entire door. Remember to search for high quality materials such as solid brass (not plated) or iron to ensure strength and durability over time. Cheap and thin metals will dent and scratch more easily and need to be replaced.

Not all companies offer custom centers or keying multiple sets the same so be sure to ask before making a selection if these options are available.

An entryway system is a beautiful way to update any front door and add new value to your home. Choose a style that reflects the personality of the home itself and the home owners and have fun. It can be a frustrating process with so many options but taken one step at a time it will have a rewarding conclusion.